Abus AZ4110 LCD Keypad for Terxon SX_MX Installation Manual do Utilizador descarregar pdf (Página 125)

100

101

10.10 Connecting expansion modules

The 8-zone wire expansion modules and the 8-zone radio

expansion modules are connected to the 4-wire bus as

follows.

Make sure when connecting the 8-zone wire expansion

module that the zone terminations (CC / DEOL) from the

alarm centre and the expansion module are identical.

10.11 Addressing of expansion modules:

A determined range of zones must be assigned to each

expansion module. Two modules must not occupy the

same zone range. The zone ranges are addressed via the

jumpers on the expansion modules.

10.12 Walk test

The OP3 output must be appropriately programmed for

the walk test (function 83, option 5). If the user activates

the walk test function then the LED for motion detection is

activated at the detector.

10.13 Detector alarm memory

For the alarm memory function, e.g. for motion detectors,

the OP3 output must be appropriately programmed

(function 83, option 3). The first detector in the line that

triggers the event can store and signalise this.

expansion modul

Alarmpanel

walk test

motion detector 1

motion detector 2

wal

test

motion detector 1

motion detector 2

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 483 484

Comentários a estes Manuais

Sem comentários

Abus AZ4110 LCD Keypad for Terxon SX_MX Installation Manual do Utilizador Página 125

Comentários a estes Manuais

Manuais e produtos relacionados com Para a casa Abus AZ4110 LCD Keypad for Terxon SX_MX Installation