Abus HSRM30000 Instruções de Operação descarregar pdf (Página 17)

– 17 –



grease, dust and loose paint etc.

Apply the hot glue to the non-drilled

exterior of the magnetic mount (III)



press the magnetic mount (III) on

to the desired installation surface

immediately. The unit can be

attached to the magnetic mount (III)

after roughly two minutes.

DRILLING

Drill a hole into the installation

surface with a 6 mm drill bit and

insert the supplied 6 mm wall plug

into the hole. Guide the supplied 5 mm

countersunk head screw through the

underside of the magnetic mount (III)

pictured below so that the screw with



(III) when it has been screwed into

and needs to be replaced before this

60-day period has expired!

INSTALLATION



magnetic mount. This mount can

be fastened to the ceiling in two

different ways, as described below.

Please note that only one side of the

magnet can attract the unit

magnetically.

ADHESION

If the adhesion method is used to

install the unit, only the hot glue

supplied with the product is

permitted for use. The surface on

which the device is to be installed

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

Sem comentários

Abus HSRM30000 Instruções de Operação Página 17