Abus FU9001 Especificações descarregar pdf (Página 26)

100

101

7-26

System Control:

Quick-Key Parameter Default Range

0606

Bell Squawk

YES/NO

ES: The following signals are emitted by the external sounder to acknowledge

whether you have successfully activated/deactivated the system:

• One tone means that the system is activated.

• Two tones mean that the system is deactivated.

• Four tones mean that the system is deactivated following an alarm.

NO: No confirmation is made by the sounder.

0707

Bell 30/10 NO

YES/NO

ES: The sounders interrupt the alarm tone for 10 seconds every 30 seconds.

NO: The sounders emit continuous alarm tones without interruption.

0808

Phone Cut Alarm NO

YES/NO

ES: Monitors the telephone line and activates the sounder if the telephone line is

cut for the period defined under Phone Line Cut Delay Time. (See also

Phone Line Cut Delay time on page 7-24.)

NO: The telephone line is not monitored and there is no alarm.

0909

3 Minute Bypass NO

YES/NO

ES: After the system has been supplied with power, zones are automatically

omitted for 3 minutes to give detectors a chance to stabilise.

NO: The zones are monitored as soon as the system is activated.

1010

Audible Panic NO

YES/NO

ES: In the event of a panic alarm, an audible alarm is issued.

NO: In the event of a panic alarm, it is transmitted by telephone. The system does not

trigger any audible alarms locally.

1111

Buzzer Æ Bell NO

YES/NO

ES: If the system is activated internally and an alarm is triggered, an alarm is

sounded for 15 seconds on the operating panels before the system activates

the external sounders and the alarm is transmitted by telephone.

NO: If the system is activated internally and an alarm is triggered, the external

sounders and the telephone line are activated immediately.

1212

Fire Temporal Pattern

YES/NO

ES: The fire signals of the internal and external sounders are three increasing alarm

tones followed by a pause.

NO: The fire signals of the internal and external sounders are two seconds of continuous

tone followed by two seconds’ pause.

1313

Code Grand Master NO

YES/NO

ES: Only a user with Grand Master authority can change user PINs and the time

and date.

NO: Users at the Master and Manager level can also change user PINs and the

time and date.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 100 101

Comentários a estes Manuais

Sem comentários

Abus FU9001 Especificações Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Abus FU9001