Abus FU8006 Secvest 2WAY Wireless Alarm Control Panel ( Manual do Utilizador Página 45

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 47
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 44
45
19.1. Errors, meanings, causes and suggested solutions
Displayed error Meaning Possible causes Suggested solutions
AC Fail The 230 V AC system
power supply is missing.
x The main fuse of the PSU on the wireless
alarm system is not fitted correctly or is
defective.
x The connecting cable between the system
and the base plate is not inserted correctly.
x The main power supply to the PSU of the
base plate has failed or the power cable
was not fitted correctly.
x PSU in base plate is defective.
x Replace the main fuse with one of the same
rating.
x Check that the fuse is correctly fitted.
x Check the correct installation of the system to
the base plate and plug the connecting cable
into the correct base plate socket.
x Check that your mains power fuse is active for
the system. Is there a 230 V power supply?
x Check the correct connection between the mains
power line and the PSU clamp.
x Contact your installer.
WAM__PSU Fail 230 V AC power supply is
missing in the accessory
module.
x The mains power cable to the 12 V power
supply is not connected correctly.
x The PSU is not supplied with power.
x The PSU that supplies power to the
accessory module is defective.
x Check the correct installation of the 12 V DC
connecting cable.
x Check that the PSU is inserted and the red LED
on the PSU is lit.
x Contact your installer.
Batt Low No battery power supply
to the system.
x The inserted batteries are not fully charged. x This error should disappear when the batteries
are fully charged.
x After a maximum of 4 hours, the batteries are
charged and this display disappears.
WAM Low Batt No battery power supply
to the accessory module.
x The lead-acid battery has not yet been
charged.
x No lead-acid battery was connected.
x This error should disappear when the battery is
fully charged.
x Check the correct installation of the 6 V, 1.2 Ah
lead-acid battery in the accessory module.
Vista de página 44
1 2 ... 40 41 42 43 44 45 46 47

Comentários a estes Manuais

Sem comentários